What’s Inside the Box - Agri Fab Tow Broadcast Spreader

See Price: http://www.canadiantire.ca/AST/browse/2/OutdoorLiving/LawnMowersTractors/LawnTractorAccessories/PRD~0601888P/Agri Fab Tow Broadcast Spreader.jsp?locale=en

Welcome. In this segment, you will see what parts are included in the box and any tools that you will need to complete the assembly.

First, carefully open the box. Remove the contents and place them on a flat surface, laying out the parts and hardware. Keep the parts and hardware together so you don’t lose anything. 

Make sure you have all of the parts listed next, before continuing with the assembly.

Inside the box you should find:

·         One Hopper, Part 1

·         Two Wheels, Part 2

·         One Left Hand Hitch Support Tube, Part 3

·         One Right Hand Hitch Support Tube, Part 4

·         One Left Hand Hopper Support Tube, Part 5

·         One Right Hand Hopper Support Tube, Part 6

·         One Cross Brace, Part 7

·         One Hitch Bracket, Part 8

·         One Hitch Tube, Part 9

·         One Flow Control Rod, Part 10

·         Two Hopper Braces, Part 11

·         One Spreader Impeller, Part 12

·         One Axle/Gearbox Assembly, Part 13

and,

·         One Flow Control Assembly, Part 14

In addition to the parts, there is also a package of hardware included in the box. This hardware includes:

·         One Hitch Pin, Part A

·         Two 1/4 inch x 2 1/2 inch Hex Bolts, Part B

·         Two 1/4 inch x 2 inch Hex Bolts, Part C

·         Six 1/4-inch x 1 3/4 inch Hex Bolts, Part D

·         Two 1/4 inch x 1 1/2 inch Hex Bolts, Part E

·         One 1/4 inch x 1 inch Hex Bolt, Part F

·         Two 5/16 inch x 1 1/4 inch Hex Bolts, Part G

·         One 1/4 inch x 3/4 inch Carriage Bolt, Part H

·         Two 5/16 inch Nylock Hex Nuts, Part I

·         Thirteen 1/4 inch Nylock Hex Nuts, Part J

·         One Short Spacer, Part K

·         Two Long Spacers, Part L

·         Nine 1/4 inch Washers, Part M

·         Five Nylon Washers, Part N

·         Four 5/8 inch Washers, Part O

·         One 3/32 inch x 3/4 inch Cotter Pin, Part P

·         One 1/8 inch x 1 1/2 inch Cotter Pin, Part Q

·         One 3/16 inch x 2 inch Cotter Pin, Part R

·         One Agitator Hairpin Clip, Part S

·         One Hairpin Cotter, Part T

·         One Wing Nut, Part U

·         One Adjustable Stop, Part V

·         Two Flat Sided Bearings, Part W

·         One Hopper Bushing, Part X

·         One 3/8 inch Plastic Bushing, Part Y

·         Two Hub Caps, Part Z

·         Three Plugs, Part AA

and,

·         One Grip, Part BB

You will need the following tools for assembly, which are not included:

·         A hammer

·         A pair of pliers

·         Two 7/16 inch wrenches

·         Two 1/2 inch wrenches

For additional or missing parts, please contact the manufacturer directly.