Combo Air Nailers User Guide

See All Air Nailers: http://www.canadiantire.ca/AST/browse/6/Tools/1/CompressorsAirTools/PneumaticFasteningTools.jsp

The most important thing you can do to ensure smooth and efficient operation of your combination air nailer, is to choose the right fastener for the job.

That means that the fastener must not only be appropriate for the work you want to do, but also that it fits the air nailer.

Your combo nailer can use different sizes and types of fasteners making it a versatile tool.

It's important to load each type of faster into the correct slot of the magazine. Keep the points of the fasteners at the bottom of the magazine and make sure the head of the fastener is loaded in the correct slot.

Never mix different sizes or types of fasteners in the magazine.

If you do have a mis-fire or a jam, disconnect your air nailer from the air hose and empty the magazine

Unlatch and open the nose cover.

Clear the jammed fastener. You may need to remove the jammed fastener with a pair of pliers.

Close the nose cover.

Re-connect your air nailer and fire a few test nails into a scrap of lumber before continuing work.

Follow the manufacturer's recommendations regarding daily and periodic maintenance. This will include keeping your nailer lubricated and rust free.

Keep the magazine clear of sawdust and debris.

You can find a wide selection of air nailers and fasteners for your building projects...at Canadian Tire